Rigol DS7034 User Programming Manual page 78

RIGOL
:CURSor:XY:BY
Syntax :CURSor:XY:BY <y>
:CURSor:XY:BY?
Description Sets or queries the vertical position of Cursor B in the XY cursor measurement mode.
Parameter
Name
<y>
Remarks
In the XY time base mode, the horizontal and vertical position of the cursor is defined
by the pixel coordinate in the XY display region. The range of the screen pixel
coordinate is from (0,0) to (479,479). Wherein, (0,0) is a location at the upper-right
corner of the screen, and (479,479) is a located the lower-left corner of the screen.
The pixel range in the horizontal and vertical direction is from 0 to 479.
Return Format The query returns an integer ranging from 0 to 479.
Example :CURSor:XY:BY 200
:CURSor:XY:BY?
:CURSor:XY:AXValue?
Syntax :CURSor:XY:AXValue?
Description Queries the X value at Cursor A in the XY cursor measurement mode. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format The query returns the X value at Cursor A in scientific notation.
:CURSor:XY:AYValue?
Syntax :CURSor:XY:AYValue?
Description
Queries the X value at Cursor A in the XY cursor measurement mode. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format The query returns the Y value at Cursor A in scientific notation.
:CURSor:XY:BXValue?
Syntax :CURSor:XY:BXValue?
Description Queries the X value at Cursor B in the XY cursor measurement mode. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format
The query returns the X value at Cursor B in scientific notation.
:CURSor:XY:BYValue?
Syntax :CURSor:XY:BYValue?
Description Queries the Y value at Cursor B in the XY cursor measurement mode. The unit is
determined by the amplitude unit selected for the currently corresponding channel.
Return Format The query returns the Y value at Cursor B in scientific notation.
2-64
Type Range
Integer 0 to 479
/*Sets the vertical position of Cursor B to 200.*/
/*The query returns 200.*/
Chapter 2 Command System
Default
300
MSO7000/DS7000 Programming Guide