Trigger:mode; Trigger:coupling; Trigger:status - Rigol DS7034 User Programming Manual

Chapter 2 Command System

:TRIGger:MODE

Syntax
:TRIGger:MODE <mode>
:TRIGger:MODE?
Description Selects or queries the trigger type.
Parameter Name
<mode>
Return The query returns EDGE, PULS, SLOP, VID, PATT, DUR, TIM, RUNT, WIND, DEL, SET,
Format NEDG, RS232, IIC, SPI, CAN, CANF, FLEX, LIN, IIS, or M1553.
Example :TRIGger:MODE SLOPe
:TRIGger:MODE?

:TRIGger:COUPling

Syntax :TRIGger:COUPling <couple>
:TRIGger:COUPling?
Description Selects or queries the trigger coupling type.
Parameter
Name
<couple>
Remarks This command is only available for the Edge trigger in which the analog channel is

selected as the source.
AC: blocks any DC components.

DC: allows DC and AC components to pass the trigger path.

LFReject: blocks the DC components and rejects the low frequency components.

HFReject: rejects the high frequency components.

Return The query returns AC, DC, LFR, or HFR.
Format
Example :TRIGger:COUPling LFReject
:TRIGger:COUPling?

:TRIGger:STATus?

Syntax :TRIGger:STATus?
Description Queries the current trigger status.
Return The query returns TD, WAIT, RUN, AUTO, or STOP.
Format
MSO7000/DS7000 Programming Guide
Type Range
{EDGE|PULSe|SLOPe|VIDeo|PATTern|DURation|
Discrete TIMeout|RUNT|WINDow|DELay|SETup|NEDGe|
RS232|IIC|SPI|CAN|FLEXray|LIN|IIS|M1553
/*Selects the Slope trigger.*/
/*The query returns SLOP.*/
Type Range
Discrete {AC|DC|LFReject|HFReject}
/*Sets the trigger coupling type to low frequency
rejection.*/
/*The query returns LFR.*/
RIGOL
Default
EDGE
Default
DC
2-163