Rigol DS7034 User Programming Manual page 185

Chapter 2 Command System
:TRIGger:SLOPe:ALEVel
Syntax :TRIGger:SLOPe:ALEVel <level>
:TRIGger:SLOPe:ALEVel?
Description Sets or queries the upper limit of the trigger level of Slope trigger. The unit is the
same as that of the current amplitude.
Parameter
Name
<level>
Remarks For VerticalScale, refer to the
the :CHANnel<n>:OFFSet
Return The query returns the upper limit of the trigger level in scientific notation.
Format
Example
:TRIGger:SLOPe:ALEVel 0.16 /*Sets the upper limit of the trigger level to 160 mV.*/
:TRIGger:SLOPe:ALEVel?
:TRIGger:SLOPe:BLEVel
Syntax :TRIGger:SLOPe:BLEVel <level>
:TRIGger:SLOPe:BLEVel?
Description
Sets or queries the lower limit of the trigger level of Slope trigger. The unit is the
same as that of the current amplitude.
Parameter
Name
<level>
Remarks
For VerticalScale, refer to the
the :CHANnel<n>:OFFSet
Return The query returns the lower limit of the trigger level in scientific notation.
Format
Example :TRIGger:SLOPe:BLEVel 0.16 /*Sets the lower limit of the trigger level to 160 mV.*/
:TRIGger:SLOPe:BLEVel?
MSO7000/DS7000 Programming Guide
Type Range
Lower limit of the trigger level to
Real
(5 × VerticalScale - OFFSet)
:CHANnel<n>:SCALe
command.
/*The query returns 1.600000E-1.*/
Type Range
(-5 × VerticalScale - OFFSet) to
Real
upper limit of the trigger level
:CHANnel<n>:SCALe
command.
/*The query returns 1.600000E-1.*/
Default
0 V
command; for OFFSet, refer to
Default
0 V
command; for OFFSet, refer to
RIGOL
2-171