Rigol DS7034 User Programming Manual page 67

Chapter 2 Command System
:CURSor:MANual:VUNit
Syntax :CURSor:MANual:VUNit <unit>
:CURSor:MANual:VUNit?
Description Sets or queries the vertical unit in the manual mode of cursor measurement.
Parameter
Name
<unit>
Remarks SOURce: in the measurement results, the unit of AY, BY, and △ Y are automatically

set to the unit of the current source.
PERCent: in the measurement results, the unit of AY, BY, and △Y are expressed in

percentage.
Return
The query returns SOUR or PERC.
Format
Example :CURSor:MANual:VUNit PERCent /*Sets AY, BY, and △ Y to be expressed in percentage in
:CURSor:MANual:VUNit?
:CURSor:MANual:CAX
Syntax
:CURSor:MANual:CAX <ax>
:CURSor:MANual:CAX?
Description Sets or queries the horizontal position of Cursor A in the manual mode of cursor
measurement.
Parameter
Name
<ax>
Remarks The horizontal and vertical position of the cursor is defined by the screen pixel coordinate.
The range of the screen pixel coordinate is from (0,0) to (999,479). Wherein, (0,0) is a
location at the upper-left corner of the screen, and (999,479) is a location at the
lower-right corner of the screen. The pixel range in the horizontal direction is from 0 to
999, and the pixel range in the vertical direction is from 0 to 479.
Return
The query returns an integer ranging from 0 to 999.
Format
Example :CURSor:MANual:CAX 200
:CURSor:MANual:CAX?
MSO7000/DS7000 Programming Guide
Type Range
Discrete
{SOURce|PERCent}
the measurement results.*/
/*The query returns PERC.*/
Type Range
Integer 0 to 999
/*Sets the horizontal position of Cursor A to 200.*/
/*The query returns 200.*/
RIGOL
Default
SOUR
Default
400
2-53