Rigol DS7034 User Programming Manual page 207

Chapter 2 Command System
:TRIGger:SHOLd:SLOPe
Syntax :TRIGger:SHOLd:SLOPe <slope>
:TRIGger:SHOLd:SLOPe?
Description Sets or queries the edge type of Setup&Hold trigger.
Parameter
Name
<slope>
Return The query returns POS or NEG.
Format
Example :TRIGger:SHOLd:SLOPe NEGative
:TRIGger:SHOLd:SLOPe?
:TRIGger:SHOLd:PATTern
Syntax :TRIGger:SHOLd:PATTern <pattern>
:TRIGger:SHOLd:PATTern?
Description Sets or queries the data type of Setup&Hold trigger.
Parameter
Name
<pattern>
Remarks H: indicates high level.
L: indicates low level.
Return
The query returns H or L.
Format
Example :TRIGger:SHOLd:PATTern L
:TRIGger:SHOLd:PATTern?
:TRIGger:SHOLd:TYPE
Syntax :TRIGger:SHOLd:TYPE <type>
:TRIGger:SHOLd:TYPE?
Description Sets or queries the hold type of Setup&Hold trigger.
Parameter
Name
<type>
Remarks
SETup: the oscilloscope triggers when the setup time is smaller than the specified

setup time.
HOLD: the oscilloscope triggers when the hold time is smaller than the specified

hold time.
SETHold: the oscilloscope triggers when the setup time or hold time is smaller

than the specified time value.
Return The query returns SET, HOLD, or SETH.
Format
Example
:TRIGger:SHOLd:TYPE SETHold
:TRIGger:SHOLd:TYPE?
MSO7000/DS7000 Programming Guide
Type Range
Discrete {POSitive|NEGative}
/*Sets the edge type to NEGative.*/
/*The query returns NEG.*/
Type Range
Discrete {H|L}
/*Sets data type to L.*/
/*The query returns L.*/
Type Range
Discrete {SETup|HOLD|SETHold}
/*Sets the hold type to SETHold.*/
/*The query returns SETH.*/
RIGOL
Default
POSitive
Default
H
Default
SETup
2-193