[:Source[<N>]]:Function:ramp:symmetry; [:Source[<N>]]:Voltage[:Level][:Immediate][:Amplitude] - Rigol DS7034 User Programming Manual

RIGOL
[:SOURce[<n>]]:FUNCtion:RAMP:SYMMetry
Syntax
[:SOURce[<n>]]:FUNCtion:RAMP:SYMMetry <val>
[:SOURce[<n>]]:FUNCtion:RAMP:SYMMetry?
Description Sets or queries the symmetry of the Ramp waveforms output from the specified
function/arbitrary waveform generator channel.
Parameter Name
[<n>]
<val>
Remarks
Symmetry is defined as the percentage that the rising period of the ramp takes up in
the whole period.
Return The query returns the current symmetry in scientific notation.
Format
Example
:FUNCtion:RAMP:SYMMetry 50
:FUNCtion:RAMP:SYMMetry?
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
Syntax
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate][:AMPLitude] <amplitude>
[:SOURce[<n>]]:VOLTage[:LEVel][:IMMediate][:AMPLitude]?
Description Sets or query the amplitude of the signal output from the specified function/arbitrary
waveform generator channel. By default, the unit is Vpp.
Parameter
Name
[<n>]
<amplitude>
Remarks Send the
impedance.
Return
The query returns the amplitude value in scientific notation.
Format
Example :VOLTage 2
:VOLTage?
2-140
Type Range
Discrete {1|2}
Real 0 to 100
t Symmetry=t/T*100%
T
Type Range
Discrete {1|2}
Related to the current
output impedance
HighZ: 20 mVpp to 5
Real
Vpp
50Ω: 10 mVpp to 2.5
Vpp
[:SOURce[<n>]]:OUTPut[<n>]:IMPedance
/*Sets the output amplitude of GI to 2 V.*/
/*The query returns 2.0000000E0.*/
Default
When omitted, by default, the
operations are carried out on GI.
10
/*Sets the symmetry of Ramp waveform output
from GI to 50%.*/
/*The query returns 5.000000E+1.*/
Default
When omitted, by default,
the operations are carried
out on GI.
5 Vpp
command to set the input
MSO7000/DS7000 Programming Guide
Chapter 2 Command System