Rigol DS7034 User Programming Manual page 228

RIGOL
:TRIGger:FLEXray:SOURce
Syntax :TRIGger:FLEXray:SOURce <source>
:TRIGger:FLEXray:SOURce?
Description Sets or queries the trigger source of FlexRay trigger.
Parameter
Name
<source>
Return The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,
Format D15, CHAN1, CHAN2, CHAN3, or CHAN4.
Example :TRIGger:FLEXray:SOURce CHANnel2
:TRIGger:FLEXray:SOURce?
:TRIGger:FLEXray:WHEN
Syntax :TRIGger:FLEXray:WHEN <cond>
:TRIGger:FLEXray:WHEN?
Description Sets or queries the trigger condition of FLEXray trigger.
Parameter
Name
<cond>
Remarks
FRAMe: triggers on the frame of the FlexRay bus.

SYMBol: triggers on the Channel Idle Delimiter (CID), Collision Avoidance

Symbol (CAS), Media Access Test Symbol (MTS), and Wakeup Pattern (WUP) of
the FlexRay bus.
ERRor: triggers when an error occurs to the FlexRay bus, including header CRC

error and frame CRC error.
TSS: triggers on the transmission start sequence of the FlexRay bus.

Return The query returns FRAM, SYMB, ERR, or TSS.
Format
Example :TRIGger:FLEXray:WHEN FRAMe
:TRIGger:FLEXray:WHEN?
2-214
Type Range
{D0|D1|D2|D3|D4|D5|D6|D7|D8|D9|D10|D
Discrete 11|D12|D13|D14|D15|CHANnel1|CHANnel2
|CHANnel3|CHANnel4}
Type Range
Discrete {FRAMe|SYMBol|ERRor|TSS}
Chapter 2 Command System
/*Sets the trigger source to CH2.*/
/*The query returns CHAN2.*/
/*Sets the trigger condition to FRAMe.*/
/*The query returns FRAM.*/
MSO7000/DS7000 Programming Guide
Default
CHANnel1
Default
FRAMe