Rigol DS7034 User Programming Manual page 223

Chapter 2 Command System
:TRIGger:SPI:WHEN
Syntax :TRIGger:SPI:WHEN <when>
:TRIGger:SPI:WHEN?
Description Sets or queries the trigger condition of SPI trigger.
Parameter
Name
<when>
Remarks When the trigger condition is "TIMeout", you can run the
command to set the timeout value.
Return The query returns CS or TIM.
Format
Example :TRIGger:SPI:WHEN TIMeout
:TRIGger:SPI:WHEN?
:TRIGger:SPI:WIDTh
Syntax :TRIGger:SPI:WIDTh <width>
:TRIGger:SPI:WIDTh?
Description Sets or queries the data width of data channel in SPI trigger.
Parameter
Name
<width>
Return The query returns an integer.
Format
Example :TRIGger:SPI:WIDTh 10
:TRIGger:SPI:WIDTh?
:TRIGger:SPI:DATA
Syntax
:TRIGger:SPI:DATA <data>
:TRIGger:SPI:DATA?
Description
Sets or queries the data value of SPI trigger.
Parameter
Name
<data>
Remarks The range of the parameter <data> is related to the current data width. The available
maximum data width is 32. Therefore, the range of <data> is from 0 to 2
Return The query returns an integer.
Format
Example :TRIGger:SPI:DATA 5
:TRIGger:SPI:DATA?
MSO7000/DS7000 Programming Guide
Type Range
Discrete {CS|TIMeout}
/*Sets the trigger condition to TIMeout.*/
/*The query returns TIM.*/
Type Range
Integer 4 to 32
/*Sets the data width to 10.*/
/*The query returns 10.*/
Type Range
32
Integer 0 to 2 - 1
/*Sets the data value to 5.*/
/*The query returns 5.*/
Default
CS
:TRIGger:SPI:TIMeout
Default
8
Default
82
32
- 1.
RIGOL
2-209