Timebase Commands; Timebase:delay:enable; Timebase:delay:offset - Rigol DS1000Z Series Programming Manual

RIGOL

:TIMebase Commands

The :TIMebase commands are used to set the horizontal parameters, such as enabling the delayed sweep
and setting the horizontal timebase mode.
Command List:

:TIMebase:DELay:ENABle



:TIMebase:DELay:OFFSet


:TIMebase:DELay:SCALe

:TIMebase[:MAIN]:OFFSet

:TIMebase[:MAIN]:SCALe

:TIMebase:MODE

:TIMebase:DELay:ENABle
Syntax
:TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description Enable or disable the delayed sweep, or query the status of the delayed sweep.
Parameter Name
<bool>
Explanation
Delayed sweep can be used to enlarge a length of waveform horizontally to view the
waveform details.
Return Format
The query returns 0 or 1.
Example :TIMebase:DELay:ENABle ON
:TIMebase:DELay:OFFSet
Syntax :TIMebase:DELay:OFFSet <offset>
:TIMebase:DELay:OFFSet?
Description
Set or query the delayed timebase offset. The default unit is s.
Parameter
Explanation LeftTime = 6×MainScale – MainOffset
RightTime = 6×MainScale + MainOffset
DelayRange = 12×DelayScale
Return Format
The query returns the offset in scientific notation.
Example
:TIMebase:DELay:OFFSet 0.000002
:TIMebase:DELay:OFFSet?
Related :TIMebase:DELay:SCALe
Commands
:TIMebase[:MAIN]:OFFSet
:TIMebase[:MAIN]:SCALe
2-80
Type
Bool
Name Type
<offset> Real
Range
{{0|OFF}|{1|ON}}
Range
-(LeftTime - DelayRange/2) to
(RightTime - DelayRange/2)
/*Set the delayed timebase offset to 2μs*/
/*The query returns 2.0000000e-06*/
Chapter 2 Command System
Default
0|OFF
Default
0
DS1000Z Programming Guide