Timebase Commands - Rigol DS1204B Programming Manual

Command Systems

TIMebase Commands

TIMebase Commands are used to set horizontal scale and horizontal offset. Changing
horizontal scale makes the waveform enlarge or shrink; and changing horizontal
position will lead the waveform offset relative to center screen.
TIMebase Commands include:
:TIMebase:MODE

:TIMebase[:MAIN]:OFFSet

:TIMebase:DELayed:OFFSet

:TIMebase[:MAIN]:SCALe

:TIMebase:DELayed:SCALe

:TIMebase:FORMat

We will give detailed introductions for each command in the following parts.
Programming Guide for DS1000B Series
RIGOL
2-21