Timebase Commands; Timebase:delay:enable; Timebase:delay:offset - Rigol DS4000E Series Programming Manual

Chapter 2 Command System

:TIMebase Commands

Command List:

:TIMebase:DELay:ENABle



:TIMebase:DELay:OFFSet


:TIMebase:DELay:SCALe

:TIMebase:HREF:MODE

:TIMebase:HREF:POSition

:TIMebase:MODE

:TIMebase:VERNier

:TIMebase:XY1:DISPlay

:TIMebase:XY2:DISPlay

:TIMebase[:MAIN]:OFFSet

:TIMebase[:MAIN]:SCALe

:TIMebase:DELay:ENABle
Syntax
:TIMebase:DELay:ENABle <bool>
:TIMebase:DELay:ENABle?
Description
Turns on or off the delayed sweep; or queries the on/off status of the delayed sweep.
Parameter
Name Type
<bool> Bool
Remarks
Only when the horizontal time base mode is Y-T (refer to the :TIMebase:MODE command) and the pass/fail
test function is disabled (refer to the :MASK:ENABle command), can the delayed sweep be turned on.
Return Format
The query returns 1 or 0.
:TIMebase:DELay:OFFSet
Syntax
:TIMebase:DELay:OFFSet <offset>
:TIMebase:DELay:OFFSet?
Description
Sets or queries the horizontal position of the delayed sweep. The default
Parameter
Name Type
<offset> Real
Remarks
The range of <offset> is from (LeftTime + DelayRange/2) to (RightTime – DelayRange/2).
Wherein,
LeftTime = -7 x MainScale + MainOffset;
RightTime = 7 x MainScale + MainOffset;
DS4000E Programming Guide
Range
{{1|ON}|{0|OFF}}
Range
Refer to Remarks
Default
0|OFF
unit is s
.
Default
0
RIGOL
2-189