Commands:
To clear the CPU fault, type the following command:
-> set /SYS/MB/Pn clear_fault_action=true
For example, to clear a fault on CP0:
-> set /SYS/MB/P0 clear_fault_action=true
Are you sure you want to clear /SYS/MB/P0 (y/n)? y
See Also
Cluster Configuration
HBA Expansion pt.1
Expanding from 2 to 3 HBAs
The figures below show steps to migrate a cluster from two to three HBAs.
NOTE: Diagrams below are not representative of proper slot location for HBAs.
Cabling Diagrams
fig.1 Cluster with two HBAs and chains of disk shelves
Chapter 2 • Hardware Maintenance
cd
show
HBA Expansion pt.1
95