Servicing The Internal Sas Host Bus Adapter (Hba) (Fru) - Oracle Database Appliance X7-2M Service Manual

Replace the Internal SAS HBA Card
Servicing the Internal SAS Host Bus Adapter
(HBA) (FRU)
This section describes servicing the internal Oracle Storage 12 Gb/s SAS PCIe RAID HBA in
an Oracle Database Appliance X6-2L system.
"Replace the Internal SAS HBA Card" on page 110
■
"Replace the Internal SAS HBA Cables" on page 116
■
Replace the Internal SAS HBA Card
Caution -
PCIe cards. You must disconnect all power cables from the system before performing these
procedures.
1. Prepare the server for service.
Refer to
additional details.
a. Power off the server and disconnect the power cords from the power
supplies.
b. Extend the server to the maintenance position.
c. Attach an antistatic wrist strap.
Remove the server top cover.
d.
Remove the super capacitor from the chassis.
2.
Grasp both ends of the cable connector, press in on the release latch, and
a.
then unplug the connector [1].
110 Oracle Database Appliance Service Manual • November 2017
Ensure that all power is removed from the server before removing or installing
"Preparing Oracle Database Appliance X6-2 Series for Service" on page 62 for