Reading Cassette Ip Images - FujiFilm FCR PRIMA T2 Operation Manual

3.2.3 Reading Cassette IP Images

CAUTION
Before using a cassette, ensure that it
is applicable to the Image Reader. Using
a cassette not applicable to the Image
Reader will disable image reading on it.
Before reading a cassette IP image, register patient
information and study menus on the Console for
the purpose of X-raying the patient.
Described herein is the procedure covering steps
up to reading exposed images.
1
Input patient information and then select
3
study menus and exposure menus on the
Console.
For details on how to register patient information
and operate study menus on the Console, refer to
the appropriate sections of the Console's Operation
Manual.
HINT
For details of available image reading mode, refer to
the Operation Manual that describes the User Utility
functions of the connected Console.
2
Subject a patient to X-ray exposure.
3
Read the exposed image with the FCR
PRIMA T2.
Explained below is the procedure to read IP images
of a cassette inserted into the FCR PRIMA T2.
1. Confirm that the Cassette Ready Lamp is lit
(green) on the operation panel.
3-4
FCR PRIMA T2 Operation Manual
Cassette Ready Lamp
897N102546
2. Insert a cassette into the equipment in alignment
with the guide on the right, with the cassette's
barcode window facing as illustrated below.
The Cassette
Ready Lamp
should be on.
Insert straight carefully.
CAUTION
● Insert the cassette in the FCR PRIMA
T2 after confirming the sides and the
direction of the cassette. Moreover,
insert the cassette straight and slowly.
If a cassette is inserted incorrectly
wrong side or direction, like at a slant,
the Image Reader can be damaged.
● When inserting the cassette, be careful
not to pinch your finger between the
cassette and the cassette set unit.
● Do not turn the scanner cleaning
handle during IP processing.
• Remove the exposure marker from the cassette
before inserting the cassette in the Image Reader.
• In case of inserting a cassette of other devices, or
inserting a cassette in the wrong direction, an error
will be occurred.
• Do not shake the Image Reader while reading the
image. Such as uneven image, which will prevent
image reading, might be generated.
3. Confirm that the Cassette Removal Lamp is
blinking (blue) on the operation panel and then
remove the cassette.
Cassette Removal Lamp
Cassette
guide
Barcode
window