Printing, Exporting, And Deleting Images And Clips - FujiFilm SonoSite Edge II User Manual

5 Select x/x to cycle to the next image or clip you want to view.
6 To return to the patient list, select List.
7 To return to imaging, select Done.

Printing, exporting, and deleting images and clips

Caution
To print an image
1 Verify that a printer is selected. For more information, see
page 3-9.
2 Do one of the following:
In the patient list, review the patient's images. Select Print when the image appears.
With the image displayed, press the A shortcut key. By default, the A shortcut key prints. To
reprogram the A and B shortcut keys, see
To print multiple images
1 Verify that a printer is selected. For more information, see
page 3-9.
2 Do one of the following:
To print all images for multiple patient exams, select one or more patient exams in the patient list, and
then select Print.
To print all images for one patient exam, highlight the patient exam in the patient list, and then select
Print.
Each image appears briefly on-screen while printing.
To export patient exams to a USB storage device
Note
A USB storage device is for temporary storage of images and clips. Patient exams should be archived
regularly.
4-32
To avoid damaging the USB storage device and losing patient data from it,
observe the following:
Do not remove the USB storage device or turn off the ultrasound system while
the system is exporting.
Do not bump or otherwise apply pressure to the USB storage device while it is
in a USB port on the ultrasound system. The connector could break.
USB export can be disabled by the Administrator. See
export" on page 3-3.
"To configure the system for a printer"
"Presets setup" on page 3-14.
"To configure the system for a printer"
on
on
"To disable USB
Imaging