Printing, Exporting, And Deleting Images And Clips - FujiFilm SonoSite M-Turbo User Manual

2 Select Edit.
3 Fill in the form fields, and select OK.
To append images and clips to a patient
exam
Although you cannot add images and clips to a
patient exam that is ended, you can automatically
start a new patient exam that has the same patient
information. Depending on your archiver, the
two exams appear as one study when exported or
archived.
1 Select the exam in the patient list.
2 Select Append on‐screen.
A new patient information form appears. The
form has the same information as the exam
you selected.
To review images and clips
You can review images and clips in only one
patient exam at a time.
1 In the patient list, highlight the patient exam
whose images and clips you want to review.
2 Select Review on‐screen.
3 Select x/x to cycle to the image or clip you
want to review.
4 (Clip Only) Select Play.
The clip plays automatically after loading.
The load time depends on clip length.
You can select Pause to freeze the clip and can
select a playback speed
5 Select x/x to cycle to the next image or clip
you want to view.
To return to the patient list, select List. To return
to imaging, select Done.
44 Images and clips
1x, 1/2x, 1/4x.
Printing, exporting, and deleting images
and clips
WARNING: To avoid damaging the USB storage
device and losing patient data from
it, observe the following:
• Do not remove the USB storage
device or turn off the ultrasound
system while the system is
exporting.
• Do not bump or otherwise apply
pressure to the USB storage
device while it is in a USB port on
the ultrasound system. The
connector could break.
To print an image
1 Verify that a printer is selected. See "To
configure the system for a printer" on
page 19.
2 Do one of the following:
• In the patient list, review the patient's
images. Select Print when the image
appears.
• With the image displayed, press the
shortcut key.
By default, the
reprogram the
"Presets setup" on page 22.
To print multiple images
1 Verify that a printer is selected. See "To
configure the system for a printer" on
page 19.
2 Do one of the following:
• Print all images for multiple patients:
Select one or more patients in the patient
list. Then select Print.
• Print all images for one patient: Highlight
the patient in the patient list, and then
select Print.
A
shortcut key prints. To
A
and shortcut keys, see
A B