3.12
Using the Magnetic Encoding tab
Use these options only if the Printer has an optional Stripe Encoding Module installed.
Note: If no Encoder is detected, the tab is active but all functions are grayed out.
Figure 20 - Magnetic Encoding
Step
Procedure
Select the Magnetic Encoding tab to display options for controlling the Magnetic Stripe encoding
1
process.
Note: The following describes these options and the Printer's magnetic encoding process.
Page 50 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013