Selecting The Clean Printer Tab; Figure 2 - Clean Printer - HID HDP5000 User Manual

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
3.6

Selecting the Clean Printer tab

To clean the printer, follow the instructions outlined on the Clean Printer tab.

Figure 2 - Clean Printer

• Clean button: Launches cleaning routine. Follow the instructions to set up the Printer.
• Help button: Launches help specific to the Clean Printer tab.
Step Procedure
Click the Clean Printer tab.
1
a. Remove the Card, InTM Film and Laminate Cartridges and close the covers.
b. Remove the paper back from both sides of the Cleaning Card.
Note: DO NOT remove the left liner if a Magnetic Encoding Module is installed in your printer.
c. Insert the Cleaning Card into the Card Hopper's infeed rollers.
d. Click Clean button.
e. Guide the Cleaning Card into the Printer as needed.
f. When the Cleaning routine is complete, the Cleaning Card exits the Printer.
g. Reinstall the Card, InTM Film and Laminate Cartridges.
The Cleaning routine begins after completing all current print jobs. Use a standard CR80 sized
cleaning card.
3.6.1 Using Clean Printer Group
July 2013
© 2012, 2013 HID Global Corporation. All rights reserved.
Page 21 of 101