Reviewing The Ribbon Low Message; Reviewing The Laminate Low Message - HID HDP5000 User Manual

3.2.2

Reviewing the Ribbon Low message

3.2.3

Reviewing the Laminate Low Message

The default setting is checked.
• If checked, Lamination Low message box is displayed with every print job when the
Printer reports low Lamination to the Driver.
• Do not show this message again. This check box allows the user to suppress a
message per Driver instance. Default = unchecked.
3.2.4 Using the InTM Film Low message
The default setting is checked.
• If checked, InTM Film Low message box is displayed with every print job when Printer
reports low InTM film to the Driver.
Page 18 of 101
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
© 2012, 2013 HID Global Corporation. All rights reserved
July 2013