Reviewing Information On The Supplies Tab - HID Fargo HDP8500 User Manual

© 2012 HID Global Corporation. All rights reserved.

Reviewing Information on the Supplies tab

Here are the guidelines for automatic positioning on the Supplies tab.
Step Procedure
1 Use this tab to determine the following information (see below):
Ribbon Level: Type, Reorder Number and Gauge Indicator.
HDP Film Level: Type, Reorder Number and Gauge Indicator.
Lamination - Cartridge 1 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 1
is detected.)
Lamination – Cartridge 2 Level: Type, Reorder Number and Gauge
Indicator. (Note: This is visible only when the Laminate – Cartridge 2
is detected.)
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
114