Using The Click And Drag Capability; Selecting "Inches Or Mm" Radio Button - HID HDPii User Manual

Defines the Y coordinate for the lower left corner of the area
•
Default = 0.000
•
Upper limit = 2.173
a. Lower limit = 0.000

Using the Click and Drag capability

Click and drag the corners and the sides of an area to change size and location of area.
•
The Horizontal, Vertical size and X, Y coordinates update accordingly.
Click and drag the area to change the location.
•
The X, Y coordinates update accordingly.

Selecting "inches or mm" radio button

Choice of inches or mm changes to measurement type. (Note: This is similar to the choice
on the Card tab.)
•
The inches radio button displays the area size and the location in inches.
•
The mm radio button displays the area size and the location in mm.
HDPii High Definition Card Printer/Encoder User Guide L001130 Rev 1.4
224