Printer Error Buttons; Printer Error Button And On-Screen Messages - HID FARGO DTC 5500LMX User Manual

22. After ribbon advances a few encoder clicks, assume the ribbon is free of card. All stop.
23. Repeat Steps 9 through 22 for the appropriate number of color/overlay Panels.
24. Either the card is ejected from the singled-sided printer or the card feed stepper engages to
queue the card for the flipper table for the dual-sided printer.
25. All stop.
5.2

Printer Error Buttons

The DTC5500LMX uses both button messages and message display.
The display message system appears as a graphical message, for example:
5.2.1

Printer Error Button and On-screen Messages

1. The Pause (
and is not in an error state.
This button LED will continue to stay on while the printer prints as long as there is no error.
This button LED will also be dimmed when the printer goes into Sleep mode.When an error
occurs, the Pause (
2. Press the Pause (
Note: The button illuminates as blue and retries the failed action.
When downloading an upgrade file, both buttons are blue and blink.
3. If a language (other than English) is currently selected, you can press and hold the Pause
( ) button during the power-up sequence to change the language back to English.
4. If no printer display is available, press or hold the buttons to access some internal tests.
To print a card with the Printer Settings, press the Pause (
when the printer is ready and idle.
To print the Alignment or the Self Test, press and hold the Pause (
power-up sequence.
PLT-02496, Version: 1.2
Troubleshooting
) button illuminates blue when the printer is capable of accepting a print job
) button no longer illuminates blue but blinks red.
) button when printer is in an error state to cause the printer to retry.
) button and hold for 4+ seconds
) button during the
Page 5-2
May 2017