Table of Contents
Advertisement
852-1322
page of the product. Table "WBM "Configuration" Page – "System Settings" Tab" summa-
rizes the device information setting descriptions and corresponding default factory set-
tings.
Parameters
Device Name
10.4.2 Device Discovery – LLDP
The LLDP (Link Layer Discovery Protocol) allows stations connected to a LAN according
to IEEE 802.1ab to send information to other stations connected to the same LAN. The
information includes essential system functions, including the management address or
addresses of an entity or entities that provide management of these functions, as well as
identification of the station's access point to the IEEE802 LAN required by the manage-
ment entity or entities.
LLDP information can only be sent to and received from devices; no information is re-
quested, and no state changes are made between nodes. The device can turn the send
and receive functions on and off independently.
LLDP is designed to be managed using SNMP. Applications that use this protocol include
topology discovery, inventory management, emergency services, VLAN assignment, and
inline power.
Note
If enabled, LLDP device information will appear on the topology map of Lean Managed
Switches. The switch information will be shared with other devices connected within the
same network.
Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 24: WBM "Configuration" Page – "System Settings" Tab
Table 15: WBM "Configuration" Page – "System Settings" Tab
Factory Default
Description
(None)
This text field can specify a particular role or application of differ-
ent switches. This text field can support a maximum of 63 charac-
ters.
Configuration in the WBM
37
Advertisement
Chapters
Table of Contents
