Table of Contents
Advertisement
852-1322/852-1328 Industrial Managed Switch
Figure 13: Start Page of WBM
9.
Select your desired page on the navigation bar at the top of the screen and
clicking on corresponding tab on the left hand side of the screen.
10.
Make the desired settings on the desired web page.
11.
Click [Submit] or [Change] or [Add] to confirm or update your changes to
apply the settings.
12.
It is highly recommended to avoid using the factory default password during
the actual operation of your device. Therefore, if you logged in with the
default password successfully, the device will remind the user to change
the password with a warning pop-up dialog and redirect the user to the
change password page as shown in Figure "Default Password Warning
Pop-up Dialog on Password Web Page". Please click the [OK] button to
accept the warning.
Figure 14: Default Password Warning Pop-up Dialog on Password Web Page
Configuration in the WBM
35
Manual
1.0.01
Advertisement
Chapters
Table of Contents
