Network Settings; Table 18 Wbm "Configuration" Tab - "Sntp" Page - WAGO 852-1328 Product Manual

852-1328
Parameter
Current Time and Date
Current Time
Current Date
Time and Date Settings
NTP Server
Time Zone
Daylight Saving Settings
Enable State
Start Day
End Day

10.4.4 Network Settings

In this tab page, users may modify network settings of Internet Protocol version 4 (IPv4)
for the WAGO industrial managed switch.
The Network Settings tab page is depicted in Figure "WBM "Configuration" Page – "Net-
work Settings" Tab". Inside the Network Settings box, the user can enable Dynamic Host
Configuration Protocol (DHCP) client inside the switch by checking the DHCP box so that
the switch can obtain IP address' setting automatically from a DHCP server available on
the user's local network. If the DHCP is enabled, the rest of the fields will be disabled.
Note that the user should consult your local network administrator for information about
the availability of DHCP server. If the user prefers a static IP setting, then the user can
proceed to enter the IP Address, Subnet Mask, Gateway, and the Primary DNS. If the
user set gateway or DNS on this page, the industrial managed switch will not use the
gateway or the DNS from DHCP server. After entering the desired information, please
click [Submit] button to change the IP Setting.
Product manual | Version: 1.2.0
Industrial Managed Switch
Description
This field displays the current time when you open or refresh the WBM.
This field displays the current date when you open or refresh the WBM.
Choose a predefined time server (public) or enter the IP address of a time server manu-
ally (manual).
Public Select one of the predefined time servers
Manual IP/Domain
Manual In the text field below, enter the IP address or fully qualified domain name for the time
server
Select the time zone you are located in.
Select Enable to enable Daylight Saving Settings or Disable to disable Daylight Saving
Settings.
Enter the date and time for the start of daylight saving time if you have activated this op-
tion. The time is displayed in 24-hour format.
Enter the date and time for the end of daylight saving time if you have activated this op-
tion. The time is displayed in 24-hour format.
Table 18: WBM "Configuration" tab – "SNTP" page
Select whether you will specify the IP address or fully qualified
domain name for the time server
Configuration in the WBM
41