Table 25 Wbm "Diagnostics" Page - "Snmp" Tab, Snmp Trap - WAGO 852-1322 Manual

Configuration in the WBM
The SNMP Trap Mode allows users to configure SNMP Trap mode or Inform mode by se-
lecting the desired mode from the dropdown list as shown in Figure WBM "Diagnostics"
Page – "SNMP" Tab, SNMP Trap". Then, click [Submit] button to change the mode. The
SNMP Trap Setting shows a list of configured SNMP Trap Server. Example in Figure
"WBM "Diagnostics" Page – "SNMP" Tab, SNMP Trap" shows an Empty list. The user
can enter an IP address in the Trap server IP field, port number of Trap server in the Port
field, and a string used as Community String for an authentication. After filled in all re-
quired field for SNMP Trap Setting, please click on the [Add]. button. Table "WBM "Diag-
nostics" Page – "SNMP" Tab, SNMP Trap" summarizes the descriptions of the SNMP
Trap parameters.
Parameters
Trap Mode
Trap server IP
Port
52 Product manual | Version: 1.2.0
Industrial Managed Switch
Figure 37: WBM "Diagnostics" Page – "SNMP" Tab, SNMP Trap
Table 25: WBM "Diagnostics" Page – "SNMP" Tab, SNMP Trap
Factory Default Description
Trap Choose between Trap mode or Inform mode.
Null Enter the IP address of your Trap Server.
162 Enter the Trap server's service port.
852-1322