Transport; Stacking; Figure 2-2. Lift Points - Thermo Scientific HERACELL VIOS 160i LK User Manual

Transport

For transport, do not lift the device using the doors or components attached to the device (e.g. control
box on rear panel) as lift points.

Figure 2-2. Lift Points

Note Lift points:
Lift the device only using the lift points.
CAUTION Heavy loads! Lift with care!
To avoid injury through physical strain, such as strain traumata and slipped discs, do not attempt to
lift the incubator alone!
To avoid injury through dropped loads, be sure to wear Personal Protection Equipment, such as
safety shoes, when lifting the incubator.
To avoid crushing your fingers or hands (particularly in a closing door) or damaging the incubator, do
not use any other lift points than those indicated in the illustration above.

Stacking

HERA
CELL VIOS
type. This is accomplished by placing an optional stacking adapter
As an option, a mobile base rack
As an alternative other support frames without castors
devices.
Note 
When installing the stacking adapter and stacking the units, follow the assembly instructions
delivered with the stacking adapter.
Note Moving stacked devices:
Before moving stacked devices, be sure to remove the support brackets!
Stacked devices provided with a mobile base rack must only be moved inside rooms on even floors
without any slopes.
Thermo Scientific
160i LK / HERA 250i LK is suited for stacking up to two devices of the same device
CELL VIOS
(2/Figure
(1/Figure
2-3) is available in order for the units to be movable.
(4/Figure 2-3) can be used for stacking up two
HERA
2
Installation of the Device
2-3) between the two units.
160i LK / 250i LK
CELL VIOS
Transport
2-3