Table of Contents
Advertisement
Installation
Chapter 2
The following installation procedures for the Model 5030 describe
packaging, lifting the instrument, unpacking the instrument, performing an
acceptance test, installing the monitor, and establishing communications.
For more information about optional equipment (such as, PM
, PM
,
10
2.5
and PM
inlet assemblies, heated sample delivery tube, roof flange
1.0
installation, ambient shelter installation, and standard rack-mount
installation), see the "Optional Equipment" chapter.
Packaging and
The Model 5030 instrument, power cord, and operator manual are shipped
Transport
in an ISTA 2A-certified packaging and all other items/accessories are
shipped separately. The Model 5030 ISTA 2A-certified packaging is
comprised of the instrument within an inner box which is secured within an
outer box using foam end-caps and corner bracing. In this configuration,
the packaging is ready for shipping by carrier domestically and
internationally.
The inner box that the instrument resides in is an ISTA 1A-certified
packaging and is appropriate for transporting the instrument on local paved
roads to the monitoring site. Precautions should be taken to secure this
package from shifting during local transport.
Using the ISTA-2A packaging is strongly recommended for transporting the
instrument over poor roads or on highways.
Lifting
A procedure appropriate to lifting a heavy object should be used when
lifting the monitor. This procedure consists of bending at the knees while
keeping your back straight and upright. The monitor should be grasped at
the bottom, in the front and at the rear of the unit. Do not attempt to lift
the monitor by the cover or other external fittings. While one person may
lift the unit, it is desirable to have two persons lifting, one by grasping the
bottom in the front and the other by grasping the bottom in the rear.
Unpacking
If there is obvious damage to the shipping container, notify the carrier
immediately and hold for inspection. The carrier, and not Thermo Fisher
Scientific, is responsible for any damage incurred during shipment.
Thermo Fisher Scientific
Model 5030 SHARP Monitor Instruction Manual
2-1
Advertisement
Table of Contents
