Table of Contents
Advertisement
Chapter 12
Serial interface 0 and 1
Setting Transfer Bit
7 to 8 bits can be set as transfer bit count. Set the bit count by the SCAnLN flag of the SCnCTR register. The
SCAnLN flag holds the former set value until it is set again.
Setting First Transfer Bit
The SCAnOD flag of the SCnCTR register can set the first transfer bit. Whether MSB first or LSB first can be
selected. When the transfer bit is set to 7 bits, LSB is first.
Transmit Bit Count and First Transfer Bit
In transmission, when the transfer bit count is 7, data is stored in bp0 to 6 as shown in Figure: 12.3.1, store data in
bp0 to 6. When the transfer bit is set to 7 bits, LSB is first and data is transferred "A" to "G" in order.
Receive Bit Count and First Transfer BIt
In reception, when the transfer bit count is 7, data is stored in bp0 to 6 as shown in Figure: 12.3.2. When the trans-
fer bit is set to 7 bits, LSB is first, and data is transferred from "A" to "G" in order.
Edge for Output/ Input
Transmission data is output in synchronization with the falling edge of the clock. Reception data is fed in synchro-
nization with the rising edge of the clock.
Table:12.3.2 Edge for Transmission Data Output/Reception Data Input
Edge for transmission data output
XII - 12
Operation
7
SCnTB
Figure:12.3.1 Transmission Bit Count and First Transfer Bit
7
SCnTB
Figure:12.3.2 Reception Bit Count and First Transfer BIt
6
5
4
3
2
G
F
E
D
C
6
5
4
3
2
G
F
E
D
C
Edge for reception output
1
0
B
A
1
0
B
A
Hide quick links:
Advertisement
Table of Contents
