Chapter 9
16-bit Timer
(11) Start the timer operation
TM8MD(0x0000A200)
bp7: TMCNE=1
TM8BC counter starts to count up. When the TM8BC counter and the TM8CA match, the timer 8 compare/cap-
ture A interrupt is generated at the rising edge of the next count clock. The interrupt request flag is set and the
value of the TM8BC counter is initialized to 0x0000 and starts to count up again.
Timer interrupt generation cycle = (TMnCA setting + 1) × Count clock source
IX - 42
Interval Timer
Setup Procedure
(11) Set the TMCNE flag of the TM8MD register to "1" to
operate the timer 8.
Description