1-Shot Output; 1-Shot Output Operation - Panasonic MN103S User Manual

Hide thumbs Also See for MN103S:

Table of Contents

16-bit Timer

9.10 1-Shot Output

1-shot output is to count only one time at a certain period of time.

Setting One Shot Output

1-shot operation is set by setting the TM0NE flag of the timer mode register (TMnMD) to "1". 1-shot operation

stops the timer by matching the binary counter and the timer compare/capture A register

Count Timing of One Shot Output (TMCLE flag= 0)

The binary counter stops at the next count clock after the value of the binary counter matches the value of the

compare/capture register, and the TMXF flag is set to "0". The setting value of the binary counter is "setting + 1"

of the compare/capture register.

Compare/capture

Binary counter

Count Timing of One Shot Output (TMCLE flag= 1)

The binary counter stops operating at the next count clock after the binary and the compare/capture register

match, and the TMXF flag is set to "0". The binary counter is cleared to 0x0000. Set the TMCNE flag to "1"

again after setting "0" to restart.

Compare/capture

Binary counter

1-Shot Output

Figure:9.10.1 Count Timing of One Shot Output (TMCLE flag= 0)

Figure:9.10.2 Count Timing of One Shot Output (TMCLE flag= 1)

Show Quick Links

Table of Contents

Mn103sa7d Mn103sa7g