4
C CONTROLLER SETTING UTILITY
4.6
Online Operation Tab
(1) Precautions for the Online operation tab
(a) When a utility communication error has occurred
(b) During reset
(c) The drive to which parameters are written
(2) Online operation tab
Read, write, and verification of parameters, and remote operation, clock setting, and
IP address setting for the C Controller module are available in this tab.
When a utility communication error has occurred during connection, set the
connection target again in the Connection settings so that the communication can
be restarted.
Communications are not available while the C Controller module is being reset.
Start communications after the reset is complete.
When writing parameters from each of the utilities to the following C Controller
module, write them to the same drive.
• Q12DCCPU-V whose serial number (first five digits) is "12042" or later
If the parameters are written to different drives, those of the drive, which include C
Controller setting parameters, will take effect.
Operation
Figure 4.17 Online operation tab
Q12DCCPU-V
Target CPU
4.6 Online Operation Tab
Q06CCPU-V
Q06CCPU-V-B
4
- 21
1
2
3
4
5
6
7
8