Module Information Tab - Mitsubishi Electric Q12DCCPU-V User Manual

5
CC-LINK UTILITY
5.2

Module Information Tab

The Module information tab displays information of the CC-Link module (own station)
controlled by the connected C Controller module.
(1) Precautions for the Module information tab
(2) Module information tab
Module information
Item
Target module
Start monitoring
button,
Stop monitoring
button
Slot n
(n is within the range set to "Target module")
Start I/O No.
Channel No.
5
- 2 5.2 Module Information Tab
(a) When a utility communication error has occurred
When a utility communication error has occurred during connection, click the
Start monitoring
button or set the connection target again in the Connection
settings so that the communication can be restarted.
(b) During reset
Communications are not available while the C Controller module is being reset.
Start communications after the reset is complete.
Table 5.2 Description of Module information tab
Other station monitoring Online operation
Select the CC-Link module to display its information.
(Default: "Slot 1 to 4")
Starts/stops monitoring of the CC-Link module.
"*" flashes in the upper right of the button during monitoring.
These buttons are disabled in the offline status.
Displays information of the CC-Link module.
The information is displayed in ascending order of start I/O No.
Displays the start I/O No. of the CC-Link module.
Displays the channel No. of the CC-Link module whose parameters have been set.
"-" appears when "Channel No." has not been set.
Q12DCCPU-V
Figure 5.1 Module information tab
Parameter settings
Description
Q06CCPU-V Q06CCPU-V-B
Target settings Test
(To the next page)