Table of Contents
Advertisement
7
CC IE CONTROL UTILITY
7.8
Precautions
(1) Parameter details
(2) Simultaneous use of utilities
(3) Written parameters
(4) Tabs available to operate offline
(5) Terminating Microsoft
(6) Connection during script file processing
(7) Time required for connection from each utility to the C Controller
7
- 39
7.8 Precautions
For details of respective parameters, refer to the CC-Link IE Controller Network
Reference Manual.
Up to eight CC IE Control utilities can be used simultaneously.
Parameters written to the C Controller module take effect when the C Controller
module is powered off and then on or is reset.
When CC IE Control utility connection is offline, data can be set only in the Parameter
settings and the Target settings tab.
Do not terminate Microsoft
Terminate CC IE Control utility first and then Microsoft
Connection from utility to a C Controller module may not be available during
processing a script file (while the RUN LED is flashing).
If the RUN LED remains flashing, refer to the C Controller Module User's Manual
(Hardware Design, Function Explanation) and troubleshoot the problem.
module
The following time is required for the C Controller module to connect to each utility
after power-on or reset.
• When executing a script file, "STARTUP.CMD":
Upon completion of the RUN LED flashing.
• When not executing a script file, "STARTUP.CMD":
Fifteen (15) seconds after completion of start or reset.
Do not attempt a connection before the above time has elapsed after completion of
power-on or reset.
Changing "Priority" to a larger value in the Option tab of C Controller setting utility
increases the time after which the C Controller module can be connected.
®
®
Windows
®
®
Windows
while CC IE Control utility is running.
Q12DCCPU-V
Q06CCPU-V
®
®
Windows
.
Q06CCPU-V-B
Advertisement
Table of Contents
