Table of Contents
Advertisement
8
DEVICE MONITORING UTILITY
8.13
Precautions
(1) Connection during script file processing
Connection from utility to a C Controller module may not be available during
processing a script file (while the RUN LED is flashing).
If the RUN LED remains flashing, refer to the C Controller Module User's Manual
(Hardware Design, Function Explanation) and troubleshoot the problem.
(2) Time required for connection from each utility to the C Controller
module
The following time is required for the C Controller module to connect to each utility
after power-on or reset.
Do not attempt a connection before the above time has elapsed after completion of
power-on or reset.
Changing "Priority" to a larger value in the Option tab of C Controller setting utility
increases the time after which the C Controller module can be connected.
(3) When accessing Q24DHCCPU-V/-VG
The accessible range of B device in Device monitoring utility is within 0 to 65534.
• When executing the script file, "STARTUP.CMD":
Upon completion of the RUN LED flashing.
• When not executing the script file, "STARTUP.CMD":
Fifteen (15) seconds after completion of start or reset.
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B
8.13 Precautions
1
2
3
4
5
6
7
8
8
- 19
Advertisement
Table of Contents
