System Menu - Mitsubishi Electric Q12DCCPU-V User Manual

6
MELSECNET/H UTILITY
6.8

System menu

(1) System menu
Item
Move, Minimize, Close
Specify CPU type
C Controller setting utility
Device monitoring utility
Version information
Open the system menu of MELSECNET/H utility in any of the following three
methods.
• Right-click on the title bar.
• Click the ( ) icon on the title bar.
• Press the [Alt] key and then the [
®
• For Windows 7 or later, right-click the icon (
the [Shift] key.
Figure 6.29 System menu
Table 6.34 Description of the System menu
®
Refer to the Microsoft Windows
Specifies a C Controller module to which parameters are set or to be monitored. (
Section 3.4)
This item is not selectable during monitoring.
Starts C Controller setting utility. (
While online, check that C Controller setting utility is connected to the same target device as for
MELSECNET/H utility.
Starts Device monitoring utility. (
While online, check that Device monitoring utility is connected to the same target device as for
MELSECNET/H utility.
For the Q06CCPU-V-B, Device monitoring utility is not available.
Opens the Version information screen. (
Q12DCCPU-V
key.
]
) on the task bar while pressing
Description
®
manual.
Page 4-1, CHAPTER 4)
Page 8-1, CHAPTER 8)
Page 6-43, Section 6.8 (2))
6.8 System menu
Q06CCPU-V Q06CCPU-V-B
Page 3-4,
6
- 42
1
2
3
4
5
6
7
8