Mitsubishi Electric Q12DCCPU-V User Manual page 274

9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
Remark
9
- 33 9.7 Precautions for Program Debugging
9.7.1 For Q12DCCPU-V
(b) VxWorks image file
VxWorks image files are required to be copied from C Controller module to the
development environment (personal computer) by FTP.
1) VxWorks image file storage source
VxWorks image files are stored in the following system drive of C Controller
module.
Model
Q12DCCPU-V
(Basic mode)
Q12DCCPU-V
(Extended mode)
* 1 XXXXX: First five digits of the serial No. of the C Controller module
Y : Function version of the C Controller module
For the checking method of the serial No. and function version, refer to the following manuals.
Q12DCCPU-V(Basic mode):
C Controller Module User's Manual (Hardware Design, Function Explanation)
Q12DCCPU-V(Extended mode):
Setting/Monitoring Tools for the C Controller Module Operating Manual
2) VXWorks image file copy destination
Copy the VxWorks image files from C Controller module to the development
environment (personal computer) by FTP. (
Table 9.6 Example of VXWorks image file copy destination
Model
Q12DCCPU-V
(Basic mode)
Q12DCCPU-V
(Extended mode)
3) When VxWorks image files are not identical
When the VxWorks image file of the development environment (personal
computer) is not identical with that of the C Controller module, copy the image
file from the C Controller module to the development environment (personal
computer) via FTP. (
POINT
When the VxWorks image files in the C Controller module and in Workbench are
not identical, a system watchdog timer error may occur in the C Controller
module.
In addition, debugging cannot be performed normally.
For other debugging methods, refer to the manual for Workbench.
Table 9.5 VxWorks image file storage source
\SYSTEMROM\OS_IMAGEFILE\Q12DCCPU-V_XXXXX-Y
\SYSTEMROM\OS_IMAGEFILE\Q12DCCPU-V_XXXXX-Y_ModeEX
C:\MELSEC\CCPU\DVx\Tools\
Page 9-46, Section 9.8)
File
*1
Page 9-46, Section 9.8)
File
*1