Mitsubishi Electric Q12DCCPU-V User Manual page 243

9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
The system illustration below represents a system image based on the features described
on the previous page.
Arrow Access target
Input module/output module
Intelligent function module
Programmable controller CPU/MotionCPU
CC-Link IE Controller Network module (another station), or
MELSECNET/H module (another station)
CC-Link IE Controller Network module (own station), or
MELSECNET/H module (host station)
C Controller module
I/O module
C Controller module
Programmable
controller CPU
6) to 12)
3)
Motion CPU CC-Link module
Figure 9.1 Bus interface function image
Table 9.1 Access targets of bus interface functions
No. given
Intelligent function module
CC-Link IE Controller
Network module or
MELSECNET/H module
Programmable
controller CPU
1)
2)
5)
CC-Link IE Controller Network or
MELSECNET/H
above
•Input (X): Reading enabled
1)
•Output (Y): Reading and writing enabled
2) Reading from and writing to buffer memory enabled
3)
4)
5)
The following operations are available.
•Remote RUN/STOP/PAUSE
6) to 12)
•Setting and reading clock data
•Reading from and writing to battery-backed-up RAM
9.1 Outline of Bus Interface Functions
4)
Remarks
9
- 2
9
10
11
12
13
A
I