Table of Contents
Advertisement
8
DEVICE MONITORING UTILITY
8.5
Setting Device to Be Monitored
Set the device to be monitored.
(1) Precautions for device setting
(a) Devices available for 16-point register monitoring
(2) Selected menu items
From the menu bar, select [Setting] [Device settings].
(3) Dialog box
Device type
Device No.
Register device list
Change
Delete
Only the randomly accessible devices can be monitored by 16-point register
monitoring.
If random access is not allowed for the specified device, a device type error (-3)
will occur.
For random accessibility of each device, refer to the following.
Page 10-17, Section 10.13
Batch monitoring
Figure 8.4 Device settings dialog box
Table 8.5 Description of Device settings dialog box
Item
Set the type (
the device to be monitored.
Set the start No. of the device to be monitored.
(HEX: Hexadecimal, DEC: Decimal, OCT: Octal)
Lists the registered devices.
Registers the device type and device No. settings, and adds the information in
Set
button
the Register device list.
Changes the registered data of the selected device.
button
Deletes the registered data of the selected device from the Register device list.
button
Q12DCCPU-V
16-point register monitoring
Description
Page 10-12, Section 10.12), block No., and network No. of
8.5 Setting Device to Be Monitored
Q06CCPU-V
Q06CCPU-V-B
8
- 7
1
2
3
4
5
6
7
8
Advertisement
Table of Contents
