Table of Contents
Advertisement
5
CC-LINK UTILITY
5.3
Other Station Monitoring Tab
This tab displays the line states of other stations (CC-Link network stations).
(1) Precautions for the Other station monitoring tab
(2) Other station monitoring tab
Other station monitoring
Module information
Item
Target module
Start I/O No.
Own station information
View all stations
button
No.
5
- 6
5.3 Other Station Monitoring Tab
(a) Monitoring status
Monitoring is stopped while CC-Link utility is being started.
To start monitoring, click the
(b) When a utility communication error has occurred
When a utility communication error has occurred during connection, click the
Start monitoring
button or set the connection target again in the Connection
settings so that the communication can be restarted.
(c) During reset
Communications are not available the C Controller module is reset. Start
communications after the reset is complete.
Table 5.8 Description of the Other station monitoring tab
Select the module to monitor as other station monitoring.
(Default: "Slot 1", Setting range: "Slot 1" to "Slot 8")
Displays the start I/O No. of the CC-Link module selected in "Target module".
Displays the station No., station type, and operation mode.
For details of operation mode, refer to the following.
Page 5-3, Section 5.2 (2) (a)
Opens the View all stations screen. (
Displays the connection number.
Q12DCCPU-V
Start monitoring
Figure 5.5 Other station monitoring
Online operation
Parameter settings
Description
Page 5-8, Section 5.3 (3))
Q06CCPU-V
button.
Target settings
(To the next page)
Q06CCPU-V-B
Test
Advertisement
Table of Contents
