12
SAMPLE PROGRAMS
12.1
Procedure for Opening Sample Programs
This section describes the procedure for opening sample programs when SW3PVC-CCPU
is installed in "C:\MELSEC".
When installing SW3PVC-CCPU in folders other than "C:\MELSEC", create a new project
with reference to the following procedure. Copying the contents of the sample program to
the source file enables the compiling.
(1) Procedure for opening the sample program for the Q12DCCPU-V
(To the next page)
12
- 5
12.1 Procedure for Opening Sample Programs
Page 9-9, Section 9.4
The following windows are those of Wind River Workbench, but the procedure is the
same when CW Workbench is used.
1
2
Start Workbench.
Select the [File]
[Import].
Q12DCCPU-V
Q06CCPU-V
Q06CCPU-V-B