Table of Contents
Advertisement
5
CC-LINK UTILITY
5.9
Precautions
(1) Parameter details
For details of respective parameters, refer to CC-Link System Master/Local Module
User's Manual.
(2) Simultaneous use of utilities
Up to eight CC-Link setting utilities can be used simultaneously.
(3) Written parameters
Parameters written to the C Controller module take effect when the C Controller is
powered off and then on or is reset.
(4) Tabs available to operate offline
When CC-Link utility connection is offline, data can be set only in the Parameter
settings tab and the Target settings tab.
For the Q06CCPU-V-B, only parameters shown in the Target settings tab can be set.
(5) Terminating Microsoft
Do not terminate Microsoft
Terminate CC-Link utility first and then Microsoft
(6) Connection during script file processing
Connection from utility to a C Controller module may not be available during
processing a script file (while the RUN LED is flashing).
If the RUN LED remains flashing, refer to the C Controller Module User's Manual
(Hardware Design, Function Explanation) and troubleshoot the problem.
(7) Time required for connection from each utility to the C Controller
module
The following time is required for the C Controller module to connect to each utility
after power-on or reset.
Do not attempt a connection before the above time has elapsed after completion of
power-on or reset.
Changing "Priority" to a larger value in the Option tab of C Controller setting utility
increases the time after which the C Controller module can be connected.
®
Windows
®
• When executing a script file, "STARTUP.CMD":
Upon completion of the RUN LED flashing.
• When not executing a script file, "STARTUP.CMD":
Fifteen (15) seconds after completion of start or reset
Q12DCCPU-V
®
®
Windows
while CC-Link utility is running.
®
Windows
Q06CCPU-V
Q06CCPU-V-B
®
.
5
5.9 Precautions
1
2
3
4
5
6
7
8
- 23
Advertisement
Table of Contents
