Mitsubishi Electric Q12DCCPU-V User Manual page 189

7
CC IE CONTROL UTILITY
Item
Change module
button
Selected station
Change station
button
Start monitoring
button
Stop monitoring
button
Network information
Network device status of selected
station
Communication test
button
Link start/stop
button
Logging
button
Close
button
Table 7.3 Description of Select diagnostics destination
Displays the Select diagnostics destination" screen when there are two or more CC-Link IE Controller
Network modules that are controlled by the C Controller module.
Change the network to one that is to be diagnosed.
Entering a station No. and clicking the
selected station.
The status of the selected station is displayed in the "Network device status of selected station" area.
(Default: Station No. of the connected station, Setting range: 1 to 120)
Determines the entry in "Selected station".
Starts automatic updating of "CC IE Control Network diagnostics result".
Stops automatic updating of "CC IE Control Network diagnostics result".
Displays the link status and station status of the network.
( Page 7-7, Section 7.3 (1))
Displays the detailed information on the selected station.
( Page 7-10, Section 7.3 (2))
Displays the "Communication Test" screen.
( Page 7-13, Section 7.3 (3))
Displays the "Link start/stop" screen.
( Page 7-15, Section 7.3 (4))
Displays the "Logging" screen.
( Page 7-16, Section 7.3 (5))
Closes the "CC IE Control Network diagnostics result" screen.
Description
Change station
button changes the display to the one for the
7.3 Diagnostics Result Screen
1
2
3
4
5
6
7
8
7
- 6