Table of Contents
Advertisement
4
C CONTROLLER SETTING UTILITY
4.3
Event History Tab
(1) Precautions for the Event history tab
4
- 4
4.3 Event History Tab
(a) Event history update timing
Event history is updated by acquiring the data from the C Controller module when
a connection is established to the C Controller module in Connection settings or
Update
when the
button is clicked.
(b) Event history displays the data registered by QBF_RegistEventLog function
The event history displays the data registered by QBF_RegistEventLog function.
(
Page 9-3, Section 9.2)
(c) When a utility communication error has occurred
When a utility communication error has occurred during connection, set the
connection target again in the Connection settings so that the communication can
be restarted.
(d) During reset
Communications are not available while the C Controller module is being reset.
Start communications after the reset is complete.
(e) Precautions for using QBF_RegistEventLog function
If the same data as in "source flag" (
specified into the argument SrcStr[] of the QBF_RegistEventLog function, it will be
difficult to differentiate the data in the <<Event history>> tab.
Do not specify the same character string as in "source flag".
The event occurrence can be located in the following ways.
• Checking "Event type" of the Detailed event information screen
Page 4-6, "4.3 (3) Detailed event information screen"
• Checking the event history file
Page 4-7, "4.3 (4) Specifications of the Event history file"
Q12DCCPU-V
Q06CCPU-V
Page 4-7, "Table 4.5 Source flag") is
Q06CCPU-V-B
Advertisement
Table of Contents
