Table of Contents
Advertisement
7
CC IE CONTROL UTILITY
(a) Icons
Each icon represents its station status or inter-station status.
Figure 7.7 Displaying each station status and inter-station status
1) Station No.
Station No. of each CC-Link IE Controller Network module is displayed.
2) Connected
This word is shown for the station connected to the CC IE Control utility (own
station).
3) Icons
The meanings of the icons are listed below.
Icon
Normally operating station
Faulty station
Although cyclic transmission is performed, a fault has occurred on any of the following:
•CC-Link IE Controller Network module
•CC-Link IE Controller Network interface board
•Cable
Faulty station (Cyclic station is stopped.)
Disconnected station (black)
Reserved station (gray)
Selected station (an icon in a green frame)
•To select, click a station icon, or move the focus with the left and right arrow keys and
press the space key.
•The detailed information is displayed in "Network device status of selected station".
•Disconnected or reserved stations are not selectable.
Being focused (an icon in a dotted line frame)
•To make it selected, press the space key.
•Disconnected or reserved stations are not selectable.
Communication error
•Selecting the station next to a faulty station will display the detailed information in the
"Network device status of selected station" area.
4) Present control station and Specified control station
Present control station: Station that is actually operating as a control station
Specified control station: Control station that is set with a parameter
1)
2)
3)
4)
Table 7.5 Descriptions of icons
Description
7.3 Diagnostics Result Screen
1
2
3
4
5
6
7
8
7
- 8
Advertisement
Table of Contents
