3
COMMON UTILITY OPERATIONS
Remark
Q12DCCPU-V with serial No. (first 5 digits)
"12042" or later
Q12DCCPU-V with serial No. (first 5 digits)
"12041" or earlier
Q06CCPU-V(-B)
3
- 6
3.5 Setting Connection Target
1. To read parameters from the C Controller module online, use the following
drive.
Table 3.3 Drives used for reading parameters
Model
2. If a utility communication error occurred after connecting, restart monitoring
Start monitoring
by clicking the
Connection settings.
Drive
The drive in which parameters of the operating C
Controller module are stored
(Standard RAM or CompactFlash card)
Standard RAM
Standard ROM
button or set the connection target again in