Changing The Display Format - Mitsubishi Electric Q12DCCPU-V User Manual

8
DEVICE MONITORING UTILITY
8.9

Changing the Display Format

The display format in device monitoring can be changed.
Note that the menu options for Batch monitoring and 16-point register monitoring are
different.
(1) Selected menu
8
- 14 8.9 Changing the Display Format
After selecting the [display switch] on the menu bar, select the display format of Word
device, Bit device, or SPG device (special direct buffer register and intelligent function
module buffer memory).
Item
Word device
Bit device
SPG device display format
Figure 8.8 Data Format menu
Table 8.9 Display format
Selects the numeric format and units of displays for values to be monitored.
Selects the numeric format, units of displays, and order of the bits for values
to be monitored.
Selects the numeric format for the following values when a SPG device is
monitored.
Start I/O No./16
Q12DCCPU-V Q06CCPU-V
Description
Q06CCPU-V-B