Mitsubishi Electric Q12DCCPU-V User Manual page 298

9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
(2) Device types for accessing CC-Link IE Controller Network modules or
Device type
Code specification
Dec. Hex.
1 1
H
2 2
H
23 17
H
24 18
H
Device type
Code specification
Dec. Hex.
1000 3E8
H
2000 7D0
H
23000 59D8
H
24000 5DC0
H
25000 61A8
H
28000 6D60
H
9
- 57 9.10 Device Types for Bus Interface Functions
MELSECNET/H modules
Specify the device type for accessing a CC-Link IE Controller Network module or
MELSECNET/H module with the argument QBF_WriteLinkDevice or
QBF_ReadLinkDevice function.
In the user program, either of the following two link device accessing methods can be
selected by specifying the device.
(a) Internal buffer access
Table 9.15 Device types for internal buffer access
Device name
*1
specification
QBFDev_LXBuf
QBFDev_LYBuf
QBFDev_LBBuf
QBFDev_LWBuf
* 1 The device name specification (macro) is defined in the include file "QbfFunc.h" of the bus
interface function. (
(b) Direct access
Table 9.16 Device types for internal direct access
Device name
*1
specification
QBFDev_LX Direct link input (LX)
QBFDev_LY Direct link output (LY)
QBFDev_LB
Direct link relay (LB)
QBFDev_LW
Direct link register (LW)
QBFDev_LSB Direct link special relay (SB)
QBFDev_LSW Direct link special register (SW)
* 1 The device name specification (macro) is defined in the include file "QbfFunc.h" of the bus
(
interface function.
* 2 Only CC-Link IE Controller Network modules can access to the areas of LB4000 and higher and
LW4000 and higher.
Link input internal buffer (LX buffer)
Link output internal buffer (LY buffer)
Link relay internal buffer (LB buffer)
Link register internal buffer (LW buffer)
Page 9-9, Section 9.4)
*2
*2
Page 9-9, Section 9.4)
Device
Device