Table of Contents
Advertisement
9
PROGRAMMING USING BUS INTERFACE
FUNCTIONS
9
- 45
9.7 Precautions for Program Debugging
9.7.2 For the Q06CCPU-V(-B)
3) When executing the Shell command from Tornado Shell or the Telnet tool
• Execution of VxWorks reboot command
Do not reboot VxWorks by executing the reboot function or pressing the
CTRL + X keys.
If VxWorks is rebooted, the C Controller module does not start properly.
Reset it in the C Controller module.
For resetting, refer to the C Controller Module User's Manual (Hardware
Design, Function Explanation).
* 1 Do not enter characters other than alphanumeric characters or special characters in Shell either
since they may be regarded as a control code.
• Execution of command without argument specified
If a command that requires an argument is executed without any
argument specified, 0 is substituted for the argument. Some commands
may cause a system error or stop (such as a system watchdog timer error)
in the C Controller module. Before executing a command, confirm the
specifications and specified argument of the command.
Example)
Do not execute the close command without the argument specified. If
executed, the resource reserved in the VxWorks system will be closed.
*1
Advertisement
Table of Contents
