Table of Contents
Advertisement
7
CC IE CONTROL UTILITY
(3) Communication Test screen
Item
Communication test details
Network No.
Station No.
Length
Communication count
W.D.T.
Execute test
button
Communication test result
<<Outward>> tab
<<Inward>> tab
Network No.
Station No.
7
- 13
7.3 Diagnostics Result Screen
The route from the own station to the specified destination is displayed on this screen,
and whether transient transmissions can be performed correctly or not is checked.
Upon completion of the communication test, the test result is displayed.
If an error occurs, take actions according to the error message.
Table 7.8 Description of Communication Test screen
Set the destination and communication data.
Set a network No. of the destination.
(Default:1, Setting range: 1 to 239)
Set a station No. of the destination.
(Default: 1, Setting range: 0 (I/O master station), 1 to 120 (control/normal station))
Set a communication data length.
(Default: 100, Setting range: 1 to 900)
Specify how many times the communication is to be made.
(Default: 1, Setting range: 1 to 100)
Set a timeout time for the communication test (in units of seconds).
(Default: 5, Setting range: 1 to 100)
Executes the communication test.
Displays the destination and communication data.
Displays the numbers of the networks and stations that are on the route from the source station
(connected station) to the specified destination.
Displays the numbers of the networks and stations that are on the route back from the specified
destination to the source station (connected station).
Displays the network No. of the turn-around point on the way from the source station (connected
station) to the specified destination.
(Range: 1 to 239)
Displays the station No. of the turn-around point on the way from the source station (connected
station) to the specified destination).
(Range: 0 to 120)
Figure 7.13 Communication Test screen
Description
(To the next page)
Advertisement
Table of Contents
